SSG
Mounting attachment accessory SSG, aluminium or stainless steel AISI 316
PNCE 40
The electric cylinder is based on the standard ISO 15552. Its outer design and dimensions are very similar to pneumatic cylinders.
The precision ball screw with reduced backlash of the ball nut and non-rotating piston rod offers high performance. Preload is available on request.
The excellent sealing of the components in the cylinder protects the interior of the cylinder from dust, water and other contaminants.
Note!
All the data of the dynamic load capacities (ball screw drive) stated in the table are theoretical without considering any safety factor. The safety factor depends on the application and its requested safety and service life. We recommend a minimum safety factor fₛ = 5,0, where fₛ is defined as fₛ = C / Fₘ. (Dynamic load capacity refers to the capacity of the ball screw drive.)
The max. axial load value needs to be considered when using the piston rod or mounting attachments’ accessories.
Maximum travel speed depends of the absolute stroke of the PNCE.
Contact us for further information.
Dimensions in mm.
The precision ball screw with reduced backlash of the ball nut and non-rotating piston rod offers high performance. Preload is available on request.
The excellent sealing of the components in the cylinder protects the interior of the cylinder from dust, water and other contaminants.
Note!
All the data of the dynamic load capacities (ball screw drive) stated in the table are theoretical without considering any safety factor. The safety factor depends on the application and its requested safety and service life. We recommend a minimum safety factor fₛ = 5,0, where fₛ is defined as fₛ = C / Fₘ. (Dynamic load capacity refers to the capacity of the ball screw drive.)
The max. axial load value needs to be considered when using the piston rod or mounting attachments’ accessories.
Maximum travel speed depends of the absolute stroke of the PNCE.
Contact us for further information.
Dimensions in mm.
Ladda ner PDF
Generating PDF
+
Lägg till i PDF-katalog
Product Information
Axial Backlash (mm): < ±0.02
Max. Acceleration (m/s): 20
Operating Temperature (°C): 0 ~ +60
Protection class: IP40, IP65
| Designation | Select all | Lead Time * | Ball screw (d x l) | Dynamic Load Capacity C (N) | Max. Axial Load Fmax (N) | Max. Drive Torque Mₚ (Nm) | Max. Travel Speed Vmax (m/s) | Max. Rotational Speed nmax (min⁻¹) | No Load Torque M₀ (Nm) | Min. Stroke Smin (mm) | Max. Stroke Smax (mm) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
2 | 16×5 mm | 13150 | 6020 | 5,30 | 0,35 | 4200 | 0,15 | 40 | 900 |
|
||
|
|
2 | 16×10 mm | 11550 | 3010 | 5,30 | 0,70 | 4200 | 0,20 | 35 | 900 |
|
||
|
|
2 | 16×16 mm | 8170 | 1880 | 5,30 | 1,12 | 4200 | 0,25 | 35 | 900 |
|
*Green: Normally in stock, contact us for current status. Blue: Contact us for delivery time.
| Designation | Select all | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | P1 | P2 | P3 | P4 | P5 | P6 | P7 | G | D1 | D2 | D3 | D4 | M1 | M2 | M3 | H | A1 | A2 | A3 | ZK1 | ZK2 | ZK3 | V1 | V2 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
144 (+0.2/-1.4) | 54 | 25 | 30 (+1.9/-0.8) | 15 | 22,50 | 20 | 18 | 30 | 30 | 5 | 4 (±0.1) | 20 (±0.1) | 54 | 38 | G 1/8 | Ø 20 (f8) | Ø 35 (d11) | Ø 8 (h7) | Ø 35 (g7) | Ø M12×1.25 | Ø M12×1.25 | M6 | Ø 8 | 24 | 6 | 6 | 13 | 19 | 17 | 16 | 4,50 |
|
||
|
|
144 (+0.2/-1.4) | 54 | 25 | 30 (+1.9/-0.8) | 15 | 22,50 | 20 | 18 | 30 | 30 | 5 | 4 (±0.1) | 20 (±0.1) | 54 | 38 | G 1/8 | Ø 20 (f8) | Ø 35 (d11) | Ø 8 (h7) | Ø 35 (g7) | Ø M12×1.25 | Ø M12×1.25 | M6 | Ø 8 | 24 | 6 | 6 | 13 | 19 | 17 | 16 | 4,50 |
|
||
|
|
144 (+0.2/-1.4) | 54 | 25 | 30 (+1.9/-0.8) | 15 | 22,50 | 20 | 18 | 30 | 30 | 5 | 4 (±0.1) | 20 (±0.1) | 54 | 38 | G 1/8 | Ø 20 (f8) | Ø 35 (d11) | Ø 8 (h7) | Ø 35 (g7) | Ø M12×1.25 | Ø M12×1.25 | M6 | Ø 8 | 24 | 6 | 6 | 13 | 19 | 17 | 16 | 4,50 |
|
| Designation | Select all | Moved Mass (kg) | Mass of the Electric Cylinder mPNCE (kg) | Mass moment of inertia JPNCE (10(⁻⁶) | ||
|---|---|---|---|---|---|---|
|
|
0.44 + 0.0007 × (Absolute stroke + E) | 1.45 + 0.0051 × Absolute stroke + 0.0007 × E | 4.50 + 0.0395 × Absolute stroke + 0.0004 × E + 0.6333 × mload |
|
||
|
|
0.44 + 0.0007 × (Absolute stroke + E) | 1.45 + 0.0051 × Absolute stroke + 0.0007 × E | 5.35 + 0.0408 × Absolute stroke + 0.0018 × E + 2.5330 × mload |
|
||
|
|
0.44 + 0.0007 × (Absolute stroke + E) | 1.45 + 0.0051 × Absolute stroke + 0.0007 × E | 7.10 + 0.0436 × Absolute stroke + 0.0046 × E + 6.4846 × mload |
|
-
-
SGS
Piston rod accessory SGS, galvanized or stainless steel AISI 304 -
SG
Piston rod accessory SG, galvanized or stainless steel AISI 30 -
FK
Piston rod accessory FK, galvanized steel -
KSZ
Piston rod accessory KSZ, galvanized steel -
HG
Mounting attachment accessory HG, galvanized or stainless steel AISI 304 -
HGLL
Mounting attachment accessory HGLL, galvanized steel -
FG
Mounting attachment accessory FG, galvanized or stainless steel AISI 304 -
ZK
Mounting attachment accessory ZK, galvanized steel -
LZ
Mounting attachment accessory LZ, galvanized steel -
SGN
Mounting attachment accessory SGN, aluminium or stainless steel AISI 316 -
SBG
Mounting attachment accessory SBG, aluminium or stainless steel AISI 304 -
LSG
Mounting attachment accessory LSG, steel (black cataphoresis) or stainless steel AISI 316 -
HGL
Mounting attachment accessory HGL, galvanized steel -
SGL
Mounting attachment accessory SGL, Aluminium or stainless steel AISI 304 -
LG
Mounting attachment accessory LG, aluminium or stainless steel AISI 304 -
ZKCE
Mounting attachment accessory ZKCE
-
Guiding Unit GUH
Body in aluminium, guides in steel. -
Motor Adapter with Coupling
Motor adapter for PNCE will be designed after receipt of order and drawing of requested motor type -
Motor Side Drive with a Timing Belt
Motor flange to be designed after receipt of order and drawing of requested motor type -
Couplings
Couplings for PNCE -
Magnetic Field Sensors
Mounting of the Magnetic field sensor on PNCE requires a HPNCE sensor holder.